Home > News > The Use Of Duckbill Mask Machine

The Use Of Duckbill Mask Machine

2022-05-17

The mask body of this machine can use 4~10 layers of PP non-woven fabric and filter material, so that it can produce finished masks with various filter levels such as N95. And this machine has a very high degree of automation, from feeding to finished products are all automated operations in one line: automatic feeding of raw materials, independent nose thread conveying system, and the nose thread can be automatically wrapped in the non-woven fabric, and the edges are automatically folded. And the finished product is cut, and the breathing valve hole can be automatically attached. The finished product produced by this Duckbill Mask Machine has a beautiful appearance; the machine has stable performance, high output, low defect rate and easy operation.

Machine Features

1. Automatic feeding system
1. Aluminum alloy frame, sturdy and beautiful, to ensure the precise size of the finished product;
2. Stainless steel clamp, can be adjusted left and right;
3. The tensioning wheel is set to adjust the tension of the fabric, so as to effectively ensure the beauty and flatness of the finished product;

4. The independent nose wire delivery group is convenient for adjustment and maintenance; after the nose wire is inserted, the positioning point is positioned, so as to effectively ensure the accuracy of the nose wire position and the stability of the nose wire.

Folding and forming system
1. Half-fold folding device, high folding accuracy and easy control,
2. Large diameter welding wheel can effectively reduce product deformation.

3. Ultrasonic heat sealing system

The Use Of Duckbill Mask Machine

Titanium alloy mold

When most mask machinery manufacturers use aluminum alloy, LK mask machine has provided and actively advocated customers to use titanium alloy mold, because compared with aluminum alloy, it is easy to oxidize and burst, and it is not suitable for long-term rush operation and use. Short life and other shortcomings, the advantages of titanium alloys are obvious:
A. Good toughness, suitable for long-term vibration;
b. The thermal/ultrasonic conductivity is strong, thus ensuring the beautiful welding and cutting effect of the product;
c. High hardness, not easy to crack, deform and rust;

D. Although its cost is about ten times different from that of aluminum alloy, from the perspective of the entire production benefit, the choice of titanium alloy mold is obviously better than that of aluminum alloy.

Imported ultrasonic transducer, 20K international frequency standard, the output is more powerful and stable; coupled with two sets of ultrasonic systems, the welding quality of the product is effectively guaranteed.
PLC program controls the action of the whole machine, reducing the difficulty of operation for users.
The performance of the whole machine is stable, the production speed is continuously adjustable, the production efficiency is high, up to 60 pieces per minute, the counting is convenient and accurate, the utilization rate of raw materials is high, the operation and adjustment are simple and convenient, the degree of automation is high, and labor costs are effectively reduced.

Previous: What Are The Uses Of The Folding Mask Machine?

Next: Classification And Characteristics Of Mask Machine